首页 产品中心 静密封产品 填料盘根
BP273系列 /WN/WG/WZ
   
 
  • 拉力很强,并可保持阀杆不受钢丝的磨损;
    Can be applide universally
  • 有很好的耐高温、耐高压能力和极高的可压缩性;
    Very good emergency running propertied
  • 很好的和阀门填料环的缺陷处完美结合。
    no wear and tear on the shafts, thermally good conductivity
   
  高纯石墨编制盘根用lnconel丝等金属增强(耐高温、高压)
  Braiding made of flexible expandable natural graphite foil with inconel reinforcement
   
  构成:用lnnconel等金属增强BEC石墨芯,外套膨胀石墨线的编织盘根
  Main sreas of application:V alves, sliding valves, soot blowers
   
  适用:阀门、滑阀、煤灰风机。
  Suitable for poer stations, petrochemicals, boiler houses, high pressure and high temperature applications
   
  行业:适用于发电厂、锅炉房及其它高温、高压密封部位。
  Pure guaphite of the highest quality-Co-efficiency where there is extension due to heat as with steel
   
  注意:安装前必须被预压成密度为1.4~1.6g/cm3的填料环.
  The rings have to be pre-comressed at a level of 1.4to 1.6duing the assembly-pre-pressed rings are recommended
   
 
  往复 阀门
压力(bar) 320
温度 (℃) -190~+650  
PH值 0~14  
 
 
 
Copyright(c) 2010 上海拜益密封制品有限公司

Tel: 021-58514921 Fax: 021-58213675 E-mail:shanghaibec@vip.163.com Web:www.shanghaibec.com.cn
上海市浦东新区桃林路18号(环球广场)B座1201室 200134